Includes

• Gundam Throne Drei
  • GN Hand Gun
  • 2 Beam Saber hilts
  • GN Shield panels
    • Closed
    • Opened
• Connection cable

Kit Features & Gimmicks

Articulation

• The head can swivel/tilt on a single ball-joint neck.
• The thin panels on the shoulder armors can slightly flip sideways.
• The arms can...
  • Swing on a peg-and-socket joints.
  • Raise horizontally.
• The upper arms can rotate.
• Elbow joints can only be bent up to 90 degrees.
• The manipulators can swivel on a ball-and-socket joint.
• The waist can turn 60 degrees due to being hindered by the panels.
• The hip joint axis can swing frontwards/backwards on one side.
• Front skirt armors and the GN Fang Containers can pivot to avoid interference with the legs' frontward articulation.
• The upper thighs can swivel on a ball-and-socket joint, though the backwards articulation is limited due to the non-poseable rear skirt armor.
• The knee parts are double-jointed.
• The ankles can pivot frontward and/or swivel on a ball-and-socket joint.

Weapons/Other Gimmicks

• The GN Stealh Field panels can be opened or closed; The upper panels can be flipped up, while the GN Shield's panels must be swapped.
• GN Hand Gun can be optionally detached from the forearm.
• The GN Hand Gun can mount with the connection cable, and is capable of connecting to HG Gundam Throne Eins' backpack.
• As an unadvertised feature, the Beam Saber hilts can be optionally removed from the shoulders as handheld weapons. (You must find a compatible Beam Saber effect piece as well.)
• The panel underneath the hip joint can be removed to reveal a port for the Action Base, which the Throne Drei can mount onto.

Tips & Tricks

• For better results, some/most of the details are needed to applied/panel lined with Gundam Markers and/or Mr. Color paints.
• Topcoat (Mr. Hobby recommended) can be used to protect applied stickers and if any, marking decals.
  • If using matte/flat-finish top coat, it is advisable not to spray on the clear/translucent and the soft parts - can be done by masking or spraying top coat while the said parts are separated.
• Care must be taken while painting the ABS joints: Using enamel paint or excessive lacquer paint layer can damage the plastic.

Variants

Reissues of the kit from September 2018 onward will feature a blue-colored Bandai Spirits logo. Later reprints from mid-2022 will also feature an additional Bandai Namco logo.