Includes

• Unicorn Gundam (Destroy Mode)
• 4 Beam Saber hilts
• Manipulators
• Weapon-holding (1 pair)
• Trigger-finger (right)
• Beam Magnum
• Beam Magnum Magazine
• Shield (Destroy Mode)
• Adapter (arm)
• Adapter (backpack)

Kit Features & Gimmicks

Articulation

• The head can pivot up/down on a hinge and swivel on a ball-joint neck.
• The shoulder joints can slightly raise upwards and/or slightly swing forwards/backwards.
• The arms can...
• Swing on a peg-and-socket joint.
• Raise horizontally.
• The upper arms can rotate.
• Both elbow and knee joints can be bent up to 90 degrees.
• The manipulators can swivel on a ball-and-socket joints.
• Front and side skirt armors can pivot to avoid interference with the leg articulation.
• The waist can swivel on a ball-and-socket joint construction.
• The hip joint axis can swing frontwards/backwards on one side.
• The upper thighs are swivel on a ball-and-socket joint construction, though the backwards articulation is limited due to the non-poseable rear skirt armors.
• The ankles can slightly tilt forwards/backwards, or sideways.

Weapons/Other Gimmicks

• The right hand is swappable.
• Each of the weapons must be wielded by their own respective hands.
• The Beam Saber hilts can be optionally removed from the backpack as handheld weapons. (Beam Effect parts sold separately.)
• Beam Magnum can mount onto either both sides of the arms or onto the backpack via a flip-out tab.
• Beam Magnum Magazine can be stored onto the rear waist armor.
• The shield can be mounted onto the backpack via an adapter (A18).
• Unicorn Gundam can mount onto any Action Bases (sold separately).

Tips & Tricks

• For better results, some/most of the details are needed to be applied & panel-lined with Gundam Markers and/or Mr. Color paints.
• Topcoat (Mr. Hobby recommended) can be used to protect applied stickers and if any, marking decals and painted details.
• If using matte/flat-finish top coat, it is advisable not to spray on the translucent parts - can be done by masking or spraying top coat while the said parts are separated.
• The Hyper Bazooka, Beam Saber effect parts and the open hands from the HGUC RX-0 Unicorn Gundam (Unicorn Mode), the Gundam UC ACE Vol.6 exclusive Hyper Beam Javelin, the Hyper Beam Javelin from the System Weapon 007 can be used on this Gunpla.
• Care must be taken while separating the hand parts: Due to its slightly tight construction, the pin that connects the thumb section can potentially snap off if you separate it with excessive force.
• The clear parts from The Gundam Base exclusive variant can be used to swap the Psycoframe parts (and its polycaps) to recreate the deactivated version of the unit.

Customizing-based tips

• The protruding support panel on the lower rear area on the knee joints (A23/A24) can be sliced off to allow it to slightly bend down further. This also increases the risk of the body drooping down backwards, so choose wisely.

B-Club related customizations

• High Detail Manipulator 200 can be used for this kit.

Variants

Main Article: HGUC RX-0 Unicorn Gundam (Destroy Mode)/Variants

Reissues of the kit from September 2018 onward will feature a blue-colored Bandai Spirits logo. Later reprints from mid-2022 will also feature an additional Bandai Namco logo.

• The Bandai Asia exclusive release of the Gunpla comes with 1/48 scale transformable Unicorn Gundam bust display base originally offered in the January 2010 issue of Dengeki Hobby.