Includes

• Gundvölva
• Beam Carbine
• Removable magazine
• Shield
• 2 Beam Sabers

Kit Features & Gimmicks

Articulation

• The head can swivel/tilt on an L-shaped ball-and-socket neck joint.
• The torso can tilt back and forth.
• The shoulder joints can swing frontward, or slightly raise upwards.
• The arms can...
• Swivel on a ball-and-socket joint.
• Raise horizontally.
• The upper arms can rotate.
• The elbow joints can be bent up to roughly 90 degrees.
• The manipulators can swivel on a ball-and-socket joint.
• The waist can rotate 360 degrees.
• The upper thighs can swing frontwards (and backwards in an extent) on a peg-and-socket joint, raise horizontally, and/or rotate on each piece.
• The side skirt armors can swing back to avoid interference.
• The knees are double-jointed.
• The ankles can pivot/tilt.

Weapons/Other Gimmicks

• Any of the weapons can be wielded by the hand parts.
• The Beam Carbine's magazine can be optionally removed.
• The shield...
• Can mount onto any forearms, though the default position is on the left.
• The adapter can slide up or down.
• Comes with 2 beam saber hilts, which can be removed as the kit's handheld weapons.
• Gundvölva can mount onto any Action Bases. (Sold separately)

Tips & Tricks

• For better results, some or most of the details are needed to be applied with Gundam Markers or Mr. Color paints.
• Topcoat (Mr. Hobby recommended) can be used to protect applied stickers and if any, marking decals and/or painted details.
• If using matte/flat-finish top coat, it is advisable not to spray on the translucent parts - can be done by masking or spraying top coat while the said parts are separated.
• Exercise caution while posing the ankle joints, especially the rear ankles and the front armor areas; Due to it's tight construction, the joints can potentially snap off even with careful posing. This can be avoided by lightly sanding them before attaching.