Includes

• Gundam GP02A (Type-MLRS)
• Backpack-mounted MLRS (Multiple Launch Rocket System)
• Rear Beam Bazooka Half
• Front Beam Bazooka Half
• Shield
• Beam Sabers x2
• Display Stand adapter
• Display stand adapter for HGUC GP01 or HGUC GP01-Fb

Kit Features & Gimmicks

Articulation

• The head can swivel on a single ball-and-socket neck joint.
• The shoulder joints can slightly swing frontward.
• The arms can...
• Swing on peg-and-socket joint.
• Raise horizontally.
• Shoulder binders can lift up.
• The upper arms can rotate.
• Both elbow and knee joints can be bent up to 90 degrees.
• The manipulators can...
• Swivel on a ball-and-socket joint.
• Pivot on each wrist.
• The waist can rotate, though in an extent unless the torso is slightly pulled up.
• The front and side skirt armors are poseable for leg clearance.
• The upper thighs can swivel on a ball-and-socket joint, though the backwards articulation is limited due to the single-piece rear skirt armor.
• The ankles can pivot/tilt in an extent.

Weapons/Other Gimmicks

• Any of the weapons can be wielded by the hand parts.
• Beam Saber hilts can be optionally removed from the side waist armors as handheld weapons.
• MLRS missile containers can swivel up and down on a joint.
• The cap on each launcher can be opened/closed via a hinge mechanism.
• The kit can be built into the Beam Bazooka configuration.
• Rear Beam Bazooka half can...
• Move on the backpack's sub-arm joint.
• Combine with the Front half component.
• Front Beam Bazooka half can be stored into the shield.
• The kit can be mounted on the BA-1 Display Stand that came with either the HGUC Physalis or the Gabthley using the provided adapter.

Tips & Tricks

• For better results, some or most of the details are needed to be painted and panel-lined with Gundam markers and/or Mr. Color paints.
• Topcoat (Mr. Hobby recommended) can be used to protect applied stickers and if any, marking decals and painted details.

Variants

Reissues of the kit from September 2018 onward will feature a blue-colored Bandai Spirits logo. Later reprints from mid-2022 will also feature an additional Bandai Namco logo.

Notes & Trivia

• This kit is from Harmony of Gundam, a collaboration design series by Sunrise, Bandai, Banpresto, and Namco Bandai.
• This was one of the few Gunplas to have a molded ABS V-fin.
• This was one of the HGUC kits that uses almost no Polycap joints.
• As a leftover from its base mold, the kit comes with a display stand adapter for the HGUC GP01 or HGUC GP01-Fb, though this is not featured in the instruction manual.