Includes

• Unicorn Gundam
• 4 Beam Sabers (Tonfas on forearms)
• 1/60 Banagher Links figurine (sitting)
• Beam Magnum
• Ammo
• Hyper Bazooka
• Shield
• 2 Beam Gatling Guns
• 1/60 Banagher Links figurine (standing)
• Display Stand

AD

Kit Features & Gimmicks

Articulation

• The head can swivel on a double-sided ball-and-socket neck joint.
• The shoulder joints can raise upwards or swing frontwards in a limited extent.
• The arms can...
• Swing on a peg-and-socket joint.
• Raise horizontally.
• The upper arms can rotate.
• The elbow joints can be bent up to 120 degrees.
• The manipulators...
• Can swivel on a ball-and-socket wrist joint.
• Feature fully-articulated fingers.
• The waist can only rotate 90 degrees.
• The hip joint axis can swing down for extra clearance for the leg articulation.
• The upper thighs can swing frontwards/backwards on a peg-and-socket joint, raise horizontally, and/or rotate on each piece.
• The front, side, and rear skirt armors can lift up to provide better clearance.
• The knees are double-jointed.
• The ankles can pivot/tilt.

Weapons/Other Gimmicks

• Unicorn Gundam (along with the Shield) can convert between Unicorn, Destroy Modes, or Unchained. (Must be separated into individual body pieces first.)
• The cockpit hatch can be opened to reveal a figurine of Banagher Links.
• Any of the weapons can be wielded by the poseable hands.
• The palms and the weapon hilts feature flip-out tabs and holes for increased gripping stability.
• In Destroy Mode or Unchained form, the forearm Beam Sabers can be swung forward to form a Beam Tonfa.
• The tabs from the Hyper Bazooka and Beam Magnum's rear section can be flipped out so they can be stored on the backpack. (Note: There's only one slot so only one of the weapons can be attached at a time.)
• The Beam Magnum can also mount onto the right forearm for storage.
• The Shield can mount onto any forearms via an adapter, though the default position is on the left.
• Beam Gatling Guns can be used as Unicorn Gundam's handheld weapons, or attach onto the forearms along with the shield.
• The ammo packs for the Hyper Bazooka and Beam Magnum are removable and each can be stored on the rear waist armor.
• All of the weapons including the shield can be mounted onto the Display stand.
• Unicorn Gundam can be mounted onto the Display stand.

Tips & Tricks

• For better results, some or most of the details (including the figurines) are needed to be applied and panel-lined with Gundam Markers and/or Mr. Color Paints.
• Top coat (Mr. Hobby recommended) can be used to protect applied stickers/marking decals and if any, painted details.
• If using matte/flat-finish top coat, it is advisable not to spray on the clear/translucent, soft, and the LED wire parts - can be done by spraying top coat while the said parts are separated.
• The PG RX-0 Unicorn Gundam LED Set can be used on this Gunpla.
• The PG RX-0 Unicorn Gundam Full Armor Unit can be used for this Gunpla to create the Full Armor Unicorn Gundam.

Variants

Italicized items are exclusives.

Reissues of the kit from September 2018 onward will feature a blue-colored Bandai Spirits logo. Later reprints from mid-2022 will also feature an additional Bandai Namco logo.

• PG RX-0［N］ Unicorn Gundam 02 Banshee Norn
• PG RX-0 Unicorn Gundam (Final Battle Ver.)
• PG RX-0 Unicorn Gundam (7-Eleven Color Ver.)
• PG RX-0 Unicorn Gundam 03 Phenex
• PG RX-0(N) Unicorn Gundam 02 Banshee Norn (Final Battle Ver.)
• PG RX-0 Unicorn Gundam 03 Phenex (Mastermind Japan Ver.)
• PG RX-0 Unicorn Gundam Bande Dessinee Ver.
• PG RX-0 Unicorn Gundam Bande Dessinee Ver. (China Red Ver.)
• PG RX-0 Unicorn Gundam 03 Phenex (Narrative Ver.)